Current position:TPEG PC slow release polycarboxylic super plasticizer 40%

TPEG PC slow release polycarboxylic super plasticizer 40%


Detailed introduction:

NEXT-Generation Water Reducing agent

  1. Polycarboxylate superplasticizer water reducing agent
  2. Slow release polycarboxylate superplasticizer slump retention water reducing agent

Slow release Polycarboxylate superplasticizer slump retention water reducing agent

CL-BT-40 and CL-BT-50 Slow release polycarboxylate superplasticizer

slump retention water reducing agents are 2015 new R&D products by

Binzhou Chengli Building Materials CO.,LTD.

The Advantages:

1. New formula,fully reaction, pure appearance

2.Low dosage and high water reducing rato

(40% mother liquid) tested by Shanlv P.O.42.5 ordinary portland cement,

with the dosage of 0.4% of CL-BT-40

87g water+1.2g CL-BT-40+300g cement

Time slump variation retention
30min 240mm rising
60min 280mm max
120min 280mm max
180min 260mm lost

CL-BT-40 and CL-BT-50 have the more stronger effect on keeping slump retention than the other slump retention

water reducing agents of china.

If you met the same trouble ,please ask for a sample to test:

Some kinds of cement are terriblly bad . the normal slump water reducing agents may only can effect in 30mins.

later the cement will lost the pumping ability. but CL-BT-40 and CL-BT-50 can last the pumping time to at least 60mins.

if need the method of making dilution mother liquid ,please send e-mails

to the sales.

3.CL-BT-40 and CL-BT-50 Slow release polycarboxylate superplasticizer

slump retention water reducing agents can totally take place the other

water reducing agents

polycarboxylate superplasticizer water reducing agents take 60% market

in china,30% market are taken by Aliphatic water reducing agent.

Slump retention type (CL-BT) using is suitable for compounding with high

water redcuing type(CL-JS). According to the concrete materials to determine

the final mixing ratio. The product adapts to all kinds of concrete/cement.

Tested by Shanlv P.O.42.5 ordinary portland cement

Materials fully chemical reaction → pure appearance→stable quality

China supplier construction material Specifications:
(1) Powder (with a solid content ≥92%, solid, suitable for a long distance transportation) , or liquid (with a solid content of 20%-50%).
(2) With a high slump retention ability, without concrete segregation, with a much smaller slump loss than that of other superplasticizers.
(3) With a good dispersion, an excellent adaptability to different cements, and good water-reducing properties. A high water-reducing ratio up to 40% could be obtained when used in high strength grade concrete.(higher than C50). With a dosage of 0.4%,water reducing rate up to 28%.
(4) Low chloride content, and no corrosion to steel.
(5) Cement paste fluidity ≥250mm (with a dosage of 0.5%).
Uses and Cautions:
(1) A recommended dosage is 0.25%-0.8%. Actual dosages should be determined by mixture design test according to concrete strength grade.
(2) It is required that the tolerance must be less than 1.0%.
(3) 0℃-40℃ the shelf life of liquid products is 6 months. After expiration date, concrete test must be carried out to confirm the quality.
(4) Concrete test must be carried out before utilization.
(5) This product is forbidden to be mixed with naphthalene superplasticizers.
(6) Experiment must be done when it is used together with other admixtures.
Price&Supply ability


1.The most competitive price in the world.

2.Finish the payment in global mode or use alibaba credit insurance service.

(alibaba credit insurance service is a online payment system. It can protect the buyer from getting the wrong products and punish

the seller and make up for the loss of buyer.)

Supply ability:

1.150 containers(1*20') per month.

2.A new order can be prepared and packaged in 2 days.


1. High water reduction

2. Low dosage, and so to save cost in comparison with other water reducers at equal performance

3. To maintain slump perfectly

4. To enable a much better flowability of the mixture

5. To improve the strength and durability of the concrete drastically

6. To save cement at equal strength and durability

7. Eco-friendly since no formaldehyde or benzene

Packaging & Shipping


7-12 days after deposit received. Qingdao Port.

After-Sales Service

(1) Free training on line or in factory or on site technical assistance.

(2) We are going to field visits when cooperation is over a year

(3) Reward the regular customer


1. Q: Are you a manufacturer or a trading company?

A: We are a manufacturer of PCE in China.

2. Q: Can you provide technical support?

A: Yes, we can provide on line technical assistance or on site technical assistance.

3. Q: How many is your production capacity?

A: We can produce final products 3000 Metric Tons per month.

4. Q: What’s your MOQ?

A: 1 Metric Ton.

5. Q: Could you offer free sample?

A: Yes, we can provide sample free for your testing.

6. Q: What’s your delivery time?

A: Within 7-12 days after receiving deposit.

7. Q: Could you do OEM or ODM?

A: Yes, we can. We can do solid content 50% or 60%.

8. Q: What’s your export port?

A: Qingdao port.

Free Sample: 150ml

Please send us your consignee account number of DHL for the purpose of our arrangement of delivery.

name Required
The content required
Click refresh verification code
. .
Customer service

Customer service